Category: News5050

Abrasives, Superabrasives, & Abrasive Products-World Markets, Applications & End-Users: 2012-2018 Analysis & Forecasts

Abrasives, Superabrasives, & Abrasive Products-World Markets, Applications & End-Users: 2012-2018 Analysis & Forecasts

The Report: This report analyzes the global market for abrasive materials and products by total consumption value, demand trends, end-user markets, applications and competitors. Scope Introduction Study Objectives Methodology & Sources Statistical Notes Products Covered Abrasive Materials Bonded Abrasives Coated Abrasives Non-Woven Abrasives Slurries/Pastes, Loose Powders & Compounds Grinding Media End-User Industries Covered Aerospace Alternative […]
The post Abrasives, Superabrasives, & Abrasive Products-World Markets, Applications & End-Users: 2012-2018 Analysis & Forecasts appeared first on News5050.

Invitation – Presentation of Sandvik´s third quarter 2015 report

Invitation – Presentation of Sandvik´s third quarter 2015 report

Sandvik will publish its third quarter results on Friday, 23 October 2015 at approximately 08:00 AM (CET).
The post Invitation – Presentation of Sandvik´s third quarter 2015 report appeared first on News5050.

The Industrial Diamond Association of America (IDA) announces BEST IN CLASS Education Course “Superabrasive Materials, Principles & Applications”,

The Industrial Diamond Association of America (IDA) announces BEST IN CLASS Education Course “Superabrasive Materials, Principles & Applications”,

The Industrial Diamond Association of America (IDA) announces BEST IN CLASS Education Course “Superabrasive Materials, Principles & Applications”, November 17 & 18, 2015 Hosted by YG-I America at their ADVANCED MANUFACTURING CENTER – 11001 Park Charlotte Blvd. – Charlotte, NC 28273-8860 USA EXPANDED TWO DAY COURSE for only $500 USD! – ONE FULL DAY ON […]
The post The Industrial Diamond Association of America (IDA) announces BEST IN CLASS Education Course “Superabrasive Materials, Principles & Applications”, appeared first on News5050.

ELEMENT SIX TECHNOLOGIES LAUNCHES SYNTHETIC DIAMOND WEB STORE

ELEMENT SIX TECHNOLOGIES LAUNCHES SYNTHETIC DIAMOND WEB STORE

Synthetic Diamond and CVD Diamond Handbook Now Available Via Online Store for Material Scientists and Engineers Looking to Trial Diamond   SANTA CLARA, Calif. (Sept. 21, 2015)—Element Six—the world leader in synthetic diamond supermaterials and member of The De Beers Group of Companies—today announced the official launch of its redesigned Web store. With a wide […]
The post ELEMENT SIX TECHNOLOGIES LAUNCHES SYNTHETIC DIAMOND WEB STORE appeared first on News5050.

Sandvik intends to divest Mining Systems operations

Sandvik intends to divest Mining Systems operations

s decided to initiate divestment of the project business Mining Systems. Mining Systems is a separate product area within Sandvik Mining and a supplier of design and engineering of material handling systems for the mining industry. In 2014 the Mining Systems operations, with 1,300 employees, had annual sales of 6.3 billion SEK representing 7% of […]
The post Sandvik intends to divest Mining Systems operations appeared first on News5050.

ELEMENT SIX TECHNOLOGIES DIAMOND USED BY MQ PHOTONICS RESEARCH CENTRE TO CREATE A HIGH-POWER DIAMOND LASER

ELEMENT SIX TECHNOLOGIES DIAMOND USED BY MQ PHOTONICS RESEARCH CENTRE TO CREATE A HIGH-POWER DIAMOND LASER

Harnessing Element Six’s Low-Absorption Single-Crystal Diamond Laser Achieves 20 Times More Power than Previous Highest Power   SANTA CLARA, Calif. (Sept. 28, 2015)—Element Six, the world leader in synthetic diamond supermaterials and member of the De Beers Group of Companies, today announced the use of its diamond by researchers at MQ Photonics Research Centre to […]
The post ELEMENT SIX TECHNOLOGIES DIAMOND USED BY MQ PHOTONICS RESEARCH CENTRE TO CREATE A HIGH-POWER DIAMOND LASER appeared first on News5050.

FIPA presents: Gap-free grippers for secure workpiece removal

FIPA presents: Gap-free grippers for secure workpiece removal

FIPA GmbH (www.fipa.com) has completely overhauled its tried-and-tested Series 100 grippers. The improved version of the gripper can securely grip and detect very flat sprues and tabs (>1 mm). The new FIPA grippers close without a gap. They securely grip not only thin sprues or tabs, but also soft malleable sprues and tabs, like those […]
The post FIPA presents: Gap-free grippers for secure workpiece removal appeared first on News5050.

H.C. Starck Group realigns Executive Board

H.C. Starck Group realigns Executive Board

Munich (Germany), September 25, 2015. H.C. Starck, one of the world’s leading suppliers of powders and components made of technology metals and advanced ceramics, realigns its Executive Board. As of October 1, 2015, the group with nearly 2,800 employees and 15 production sites worldwide will be led by four Executive Board Members. Edmar Allitsch, previously […]
The post H.C. Starck Group realigns Executive Board appeared first on News5050.

Hurco Announces New Appointments

Hurco Announces New Appointments

INDIANAPOLIS, September 15, 2015 — Hurco Companies, Inc. (Nasdaq: HURC) has announced the promotions of Joe Braun to Vice President of Marketing and Product Management and Scott Camloh to National Sales Manager. Hurco also announced it has hired Cory Miller as General Manager of Hurco North America.   Joe Braun has worked at Hurco since […]
The post Hurco Announces New Appointments appeared first on News5050.

Syndicated news feed from News5050.com

Rollomatic to hold OpenHouse 2015 this November

MUNDELEIN, ILLINOIS, September, 2015 – Rollomatic, a leading machine tool manufacturer based in Le Landeron, Switzerland, is hosting the bi-annual OpenHouse 2015 event in Rollomatic’s North American headquarters in Mundelein, IL, from November 3rd to 5th, 2015.   Rollomatic continues the success and growth of its series of multi-axis tool grinding machines and peel grinding […]
The post Rollomatic to hold OpenHouse 2015 this November appeared first on News5050.